Skeptics are not alone in saying that vaping is a dead topic or vaping has stopped developing, but in fact they are wrong, as the number of vapers is constantly growing. And even in spite of experts’ claims that vaping is more harmful than tobacco smoking. Therefore, many manufacturers (both established and relatively new to the vape market) are constantly offering new and interesting devices. The young company Rincoe, which has already managed to show up in many stores, recently presented its starter kit Manto Pro 228W TC Kit. We can’t say that this kit can surprise experienced vapers, but the fact that the box mod comes with not a tank, and a drip, at least, is interesting. In any case the device is interesting both for beginners and for vapers with experience.

General Info

Rincoe Manto Pro 228W TC Kit starter kit that consists of a box mod that runs on two batteries, with a proprietary chipset through which the vaper gets a good functionality and performance, and a drip for two spirals with side blowing. The box mod is made in a rather traditional rectangular form factor with side panels on magnets. canadian vape shop calgary The device is controlled by a proprietary board that allows you to use it in several standard modes. The drip that comes with it is fairly standard two spirals with counter installation and side blowing. Buy Rincoe Manto Pro 228W TC Kit is available in three versions – Sugar Skull, Graffiti, Dead Skull.

Kit

We can not say that the manufacturer has somehow special equipped this starter kit, rather, the Kit is quite standard and without any special frills, but the vaper will find everything that is necessary for trouble-free use of the kit. In a simple cardboard box you can find:

Manto Pro mod box mod;

Drip-atomizer Metis RDA;

USB cable for charging;

Standard accessories for drip screwdriver, fingerings, screws;

Two user manuals;

Warranty card;

User Manual.

Manto Pro mod

The company Rincoe appeared on the vape market relatively recently, but in this time has already earned credibility among vapers, as at an affordable price you can get productive and functional devices. The appearance of a new box mod was quite logical, as many vapers like not only the technical characteristics of devices, but also the design, the more that mod Manto Pro 228W is a medium-sized device, made in an interesting design and has good ergonomics.

Rincoe Manto Pro 228W is made in a rather traditional form factor, which many vapers call a brick with rounded corners and edges, but this does not mean that it is not convenient it is medium-sized and sits perfectly in the hand. Designers decided to abandon the standard colors in the device used originally decorated side panels, set on a standard black body. Dimensions of the device are quite modest – 52*26.5*126 mm, so it will not take too much space in your pocket, and you can install atomizers up to 26 mm in diameter on it.

The maximum power of 228 watts is provided by two traditional 18650 batteries, which are installed under one of the side panels (with picture), held by magnets.

If necessary, the batteries can be charged using the micro-USB connector located on the side panel with 2A current.

Rincoe uses its own chipsets in its box mods, and the Manto Pro 228W is no exception. The board is quite productive, allowing you to get the maximum power of 228 watts and is designed to work in four modes: variwatt, heat control, TCR and bypass. The minimum resistance, with which the board works, is 0.08 ohms (variwatt and bypass) and 0.05 (TCR).

For ease of use, the box mod is equipped with a fairly small monochrome display, where you can find data about the battery charge, operating mode, power, coil resistance, voltage.

Metis RDA Drip Atomizer

It is worth paying tribute to Rincoe who provided the Manto Pro 228W TC Kit with a non-traditional vaporizer tank, but a custom made Metis RDA drip atomizer. This kind of Kit is rare, so the vaper will get an interesting kit, capable of pleasing the taste and bulk.

The Metis RDA drip is hard to call innovative as it is a classic 24 mm diameter drip atomizer. On the deck there are two racks with large enough holes for the counter installation of two spirals. Beginners, of course, will have to get used to the exact installation of the coils, but vapers with experience won’t have any questions. The vat of the drip is big enough to hold up to 1.2 ml of liquid.

The case is made of stainless steel, but the dome is made of aluminum, so it will heat up quite a lot. But the manufacturer has provided for this, too, and equipped the drip with a high 810-meter dope-less drip-tip, which can be replaced without any problems. Blowing is side-adjustable by rotating the top-cap.

Conclusions and impressions

The Rincoe Manto Pro 228W TC Kit is a mid-range starter kit that is perfect for many vapers who are not looking for super settings and use box mods in traditional modes. The fact that the kit is complete with a drip, the vaper is guaranteed to get Excellent and full-bodied flavor and the original design will allow you to stand out among your friends and acquaintances.

Advantages and disadvantages

Advantages

Little gap in the battery compartment cover;

The counter installation of spirals requires skill;

The dome during operation is very warm.

Advantages

The original design;

The compact size;

Fast charging;

Seating tanks and drip tubes with a diameter of up to 26 mm;

Productive and functional chipset;

Easy control;

Four modes of operation;

Easy to maintain vape;

Excellent and full-bodied flavor.The case is made of stainless steel, but the dome is made of aluminum, so it will heat up quite a lot. But the manufacturer has provided for this, too, and equipped the drip with a high 810-meter dope-less drip-tip which can be replaced without any problems. Blowing is side-adjustable by rotating the top-cap.