The pod-mod format has become one of the most popular and in demand today, since, with their compactness and autonomy, they are able to please the vaper with good taste and bulk. At the same time, for users of tanks and drips, for whom it is common to independently install coils with a resistance of up to 0.1 Ohm, such a stir is a little incomprehensible. But every day there are fewer and fewer such fans, and more and more fans of sub-mods. The Voopoo company is a leader in the production of such devices, and one of the devices that is in considerable demand is the Vinci X. Having decided to upgrade or pump it up a little, the company presented the Voopoo VINCI X 2 POD kit (and it did this simultaneously with the presentation of the VINCI 2 POD kit ).

General information

Voopoo VINCI X 2 POD kit is a medium-sized pod-mod, powered by one replaceable 18650 battery, running the GENE AI 2.0 chipset and designed for use with PnP series vaporizers. The device looks similar to the first version, but with more rounded edges and corners, although it cannot be called completely compact, since it uses a replaceable 18650 battery. The GENE AI 2.0 chip does not particularly please the vaper with its functionality, but the chipset is characterized by stable operation and performance . The device is designed to install PnP series vaporizers and the corresponding service base, so the vaper has plenty to choose from. You can buy Voopoo VINCI X 2 POD kit in five colors: Carbon Fiber, Dazzling line, Velvet Blue, Neon, Pine Gray.

Equipment

The new device, like most devices from Voopoo, has quite standard equipment, but it is quite enough so that the vaper can use it without any problems immediately after purchase. In the box, the vaper will find:

Battery pack VINCI X 2 Device;

VINCI 2 Cartridge;

Evaporator PnP-VM1 0.3″Omega; Coil;

Evaporator PnP-VM6 0.15″Omega; Coil;

USB Type-C cable;

User guide.

Battery pack VINCI X 2 Device

It is unlikely that any vapers will argue that the release of the Vinci sub-mod by Voopoo was a small revolution in the world of vaping, since it showed that a device of this format could replace a full-fledged box mod with a tank. The second in this series was Vinci X with the ability to use a replaceable 18650 battery, which the company has now decided to improve a little, making it more reliable and practical.

If a vaper has ever seen the Vinci X, then the design of the Voopoo VINCI X 2 POD kit is unlikely to surprise him, since it is very similar to its predecessor, but has more rounded edges. The device cannot be called miniature 121*29*27 mm, but this size is quite justified; the device uses a replaceable 18650 battery. The use of a three-layer coating on the side surface, which is opposite to the display, deserves special attention; it is protected from various types of influences.

The maximum power of the Voopoo VINCI X 2 POD kit is 80 Watts, and it is provided by a replaceable traditional 18650 battery, which is installed under the hinged cover. If necessary, you can charge the battery using the USB Type-C connector located on the side of the device with a current of 2A.

It is quite logical and natural that the Voopoo VINCI X 2 POD kit is equipped with a GENE GENE AI 2.0 series chipset, thanks to which the vaper will receive two possible operating modes: Smart (automatic selection of the optimal power depending on the installed evaporator) and RBA (manual power setting). An important feature of this chip is that it supports a minimum resistance of 0.15 Ohms.

The device is equipped with a 1.08-inch diagonal color display, the orientation of which can be changed. On the display you can find a standard set of information about the operation of the device: battery charge level, mode, power, number and time of puffs, evaporator resistance and operating voltage.

VINCI 2 Cartridge

The VINCI 2 Cartridge is made in the best traditions of this series in a battery pack, it is held with magnets and is made with a flat, rather large mouthpiece.

The fact that Voopoo devices use PnP series evaporators is not news, and the Voopoo VINCI X 2 POD kit uses the same ones, including the serviceable base. In the kit, the vaper will find two vaporizers of this series: PnP-VM1 0.3″Omega; Coil and PnP-VM6 0.15″Omega; Coil, so there will be no questions regarding taste and bulk. Both evaporators can be safely classified as sub-vaporizers.

The device provides the ability to adjust the airflow, implemented using a small slider located in the battery block under the cartridge.

To refill the cartridge, there is a small silicone plug on its side surface, opening which you can fill in 6.5 ml of liquid.

Conclusions and impressions

It cannot be said that the Voopoo VINCI X 2 POD kit is radically different from the first version, but there are differences, and they affected not only the design, but also the chip, thanks to which the device began to work more stable. The vaper will receive a medium-sized device, with a large tank and the ability to choose one of many evaporators, thanks to which the Voopoo VINCI X 2 POD kit can confidently replace a full-fledged box mod and tank.

Advantages and disadvantages

Disadvantages

For refueling, it is necessary to remove the cartridge from the battery pack;

Limited functionality.

Advantages

Compact dimensions;

Ergonomic design;

Replaceable 18650 battery

fast charging;

Powerful and reliable chipset

Two operating modes;

Color information display;

Large cartridge volume;

Adjustable airflow;

Possibility of installing PnP series cartridges and RBA-base.