Atomizer manufacturers are constantly in a state of creative search; they need to offer already quite sophisticated vapers devices that will not only attract attention, but also delight with their taste characteristics. Not long ago, one of the best sellers was the Manta tank tank from Advken, which is rightfully considered exemplary in terms of taste and volume. But the company does not stop, so the light was released with a tank tank with a rather specific and a little incomprehensible to many name CP TF RTA, the design of which is original and designed to maximize the taste of the liquid.

General information

Advken CP TF RTA tank tank, which uses an innovative top airflow design that allows you to maximize the taste of the liquid, is equipped with two glasses of different volumes and is designed to use one spiral. The atomizer will be of interest to those vapers who prefer to use single-coil tanks with a small evaporation chamber to obtain high levels of flavor transfer. vape devices in canada The tank is available in two colors: black and steel, but this is unlikely to disappoint vapers, since the colors are universal, suitable for any box mods .

Equipment

Considering that the Advken CP TF RTA is a serviceable atomizer, the manufacturer packages it very well, so the box contains:

CP TF RTA atomizer with pre-installed 4 ml glass;

Spare glass 3 ml;

Napkin;

Branded Doctor Coil screwdriver, which can be used as a 3 mm frame;

set of orings;

Spare screws;

Cotton;

Triple fused clapton coil made of Ni 80 with a resistance of 0.3 Ohm.

It’s worth saying right away that you can use the tank right away, but the included screwdriver is not the most convenient, so it makes sense to use the more practical classic options.

Appearance and design

We can confidently say that the new device has nothing in common with the well-known Manta, so you shouldn’t look for anything in common with the “CP TF RTA. The new atomizer has a fairly classic design, which is a little aggressive, but at the same time pleasing to the eye. Despite The fact that there are only two colors of the tank, it looks very decent on any box mod, especially since the diameter of the atomizer is 24 mm. When using bubble glass, not only the volume (4 ml) changes, but also the diameter of 28 mm, which is quite logical , and if you use glass with a volume of 3 ml, then the diameter at the widest point will be 25 mm.

The complete drip tip of the 810 standard is designed without rings and made of translucent plastic. Naturally, you can use any drip tips from the vaper’s collection; there will be no problems installing them.

Refilling is implemented quite modernly using a slide lock system or a sliding lid mechanism, the direction of pressing is indicated by an arrow. Once the lid is slid open, a fairly large opening is available to the vaper. In order to avoid difficulties with moving the lid, it is recommended to remove the drip tip before refilling (this is especially true when using drip tips not included in the kit).

Base, airflow and design features

The developers of the CP TF RTA decided to pay special attention to flavor transfer, and not bulk, so after disassembling the atomizer, the vaper will be greeted with a standless base for one coil. Installing a spiral will not raise any questions, but it is important to choose the correct length of the legs, which should be 5-6 mm, otherwise you may lose the taste.

The legs of the spiral are secured using two horizontal screws. Placing the cotton wool will not be difficult, since there are quite large grooves in the base. The deck is somewhat raised, so you will have to put quite a lot of cotton wool to avoid a fire.

But the most important feature of this atomizer is the design of the blowing system. The peculiarity of the tank is that it has top airflow (lately it has become increasingly popular), but the dome design is quite interesting; it uses two domes. The outer one is traditional, but the inner one is small in size with holes aimed directly at the spiral. It is worth saying that the outer dome is screwed to the base, and the inner one simply sits tightly on it. This solution allows us to obtain a minimal evaporation chamber in volume, which has a very positive effect on the transfer of taste. To prevent short circuits, there are plastic inserts on the deck.

Conclusions and impressions

Advken CP TF RTA is a rather interesting device that will definitely appeal to fans of single-spiral tanks. It is worth paying tribute to the taste transfer obtained due to the small evaporation chamber. The tank is easy to use and maintain, although it has a slightly strange design. We can confidently say that the CP TF RTA will definitely find its buyers who care not about bulk, but about taste characteristics.

Advantages and disadvantages

Disadvantages

Illogical use of the 810 drip tip;

Difficulty in choosing the height of the spiral;

Selection of the amount of cotton wool;

 Inaccurate airflow adjustment.

Advantages

Excellent taste transfer;

An original technical solution regarding airflow;

Convenient refilling lid;

Ease of use and maintenance;

Sippy cup;

Traditional design;

Decent equipment.