Recently, there is an interesting trend in the number of tanks for tight cigarette puffs is constantly growing. Many vapers remember that a few years ago there were only two or three Subtank and Sirena atomizers with a tight draw. But now a rare manufacturer hasn’t released at least one or two cigarettes. If we turn to statistics, no one will argue that one of the leaders in this direction can surely consider Vandy Vape, which together with Alex From VapersMD released the sensational Berserker. After the release of the first version and its success, there were a lot of Berserker series tanks and dregs from this manufacturer. One of the last Berserker was Berserker V1.5, but even that didn’t stop Alex From VapersMD who decided to flood the whole cigarette market. So it is no wonder that Vandy Vape Berserker BSKR V1.5 MINI MTL RTA was released. It is almost exactly the same size as Berserker 1.5 but with smaller dimensions which makes it suitable for stealth kits.

General Data

Vandy Vape Berserker BSKR V1.5 MINI MTL RTA is a compact atomizer with two steel and glass flasks, designed for installation of a single coil, designed for a tight cigarette draw, allowing you to maximize the taste of the liquid. Design of this tank is exactly the same as the 1.5 version with 24mm diameter, but it is a little bit smaller, so it can be perfectly used on small box-mods. The design of the base, if you compare it to the first version, became much more convenient and practical, both when installing the coil, and when laying the wool. Special attention should be paid to the air blowing system which is realized by an oblong hole under the coil and air inlets with diameter 1-1,8 mm, thanks to which you can get an almost ideal cigarette puff. You can buy the Vandy Vape Berserker BSKR V1.5 MINI MTL RTA in four colors: matte black, steel, gray and rainbow.

Kit

No one would argue that Vandy Vape always packs its devices very decently, and this atomizer is no exception in the company blue box you can find:

Atomizer Berserker BSKR V1.5 MINI MTL RTA;

Metal flask;

Replacement dellrin drip tip;

Additional drip tip from delrin pawn;

Two spirals;

Replacement fingerings;

Spare Phillips screwdriver screws;

Blue screwdriver;

User’s Manual.

Appearance and design

If a vaper has had a chance to hold Berserker BSKR V1.5 in his hands or at least see reviews of it, the mini version will not surprise him. Naturally externally Berserker BSKR V1.5 MINI MTL RTA is very different in its appearance from the first version it became more angular and austere, but at the same time it looks much better.

The diameter of the device is 22 mm, so it’s perfect for stealth devices of small size. An important positive point, which can be considered a work on mistakes relative to the first version, is the presence of convenient notches on the top lid, allowing it to open without much trouble for refilling the liquid.

Vandy Vape provided this atomizer with quite an interesting drip-type, which consists of a metal radiator and a mouthpiece made of Ultem or Delrin. Additional drip-tip from delrin is high enough, so it is very practical.

It is worth noting separately the fact that depending on vaper’s preferences you can use both standard glass (2ml), and metal flask (2.5 ml), which although will not allow you to control the level of liquid, but will not break if dropped.

Base, blowdown and usage features

If we talk about the base of Berserker BSKR V1.5 MINI MTL RTA, it is much more convenient than the first version. But at the same time the vaper is presented two racks with slotted screws, the installation of the coil in which will not cause any problems, as everything is very simple and clear.

A special thanks to the developers of the company (and maybe even Alex) for the fact that stacking the wool in Berserker V1.5 has become much easier and more convenient. In order to lay exactly as much absorbent cotton as you need there are limiters and a small window with which the vaper can clearly cut the ends of the absorbent cotton.

Berserker BSKR V1.5 MINI MTL RTA is a classic cigarette burner, so special attention was paid to its blowing system. The air directly to the coil is blown through the extended hole, so the coil is blown along its entire length. Traditional air intake by means of point holes with diameter 1/1,2/1,4/1,6/1,8 mm with possibility to regulate by the ring at the base of the tank.

Conclusions and impressions

The Vandy Vape Berserker BSKR V1.5 MINI MTL RTA is a worthy continuation of the Berserker lineup that can offer not only easy handling and practicality but also good taste with its cone shaped dome and airflow system.

Advantages and disadvantages

Disadvantages

There is still no complete tightness when the blowhole is fully closed;

If you use a steel dome, the level of liquid is not visible to beginners will be difficult to control it.

Advantages

Rich Kit;

Excellent flavor transfer;

Original design;

Two custom drip-types;

Convenient helix installation;

Easy absorbent cotton packing.