Given the fact that almost all vape device manufacturers have paid attention to the segment of sub-mods and POD-systems, the appearance of new box mods and tanks causes almost a puppy’s excitement. It is enough to talk to many vapers and it becomes clear that not everyone is ready to give up big clouds and rich flavor for the sake of compactness and liquids based on salt nicotine. Good news is that producers have recently remembered vapers and started releasing new box mods, tanks and drips. One striking example of this company Lost Vape, which presented the BTB 100W Starter Kit. By the way, the name BTB is an acronym for Back to Basic. And, frankly, in many moments came to mind devices which were mass-produced three or four years ago, but at the same time the new kit is made with all modern requirements.

General Info

Lost Vape BTB 100W Starter Kit is a compact starter kit that consists of a single battery box mod with a performance board and tank that runs on interchangeable vaporizers or RBA-base. The new box mod features compact size and somewhat unusual for Lost Vape design, although its ergonomics is not questionable. The mod is equipped with a productive functional chipset, which works steadily and without problems. canadian vape shop calgary Ultra Boost X Tank is designed to work with interchangeable vaporizers or serviced base, and the vaper can set the best for him blowing mode DL or MTL. The Lost Vape BTB 100W Starter Kit is available in seven colors in the camo and vintage series.

Kit

It’s hard to call Lost Vape greedy in terms of kits, as you can find everything you need to fully use the device in the box. The only remark, but it is not only to Lost Vape, but to all manufacturers lack of serviceable base in the kit. In the box the vaper will find:

BTB box mod;

Atomizer Ultra Boost X TANK 2 ml and pre-installed vaporizer Ultra Boost M3 Coil15ohm;

Ultra Boost MTL Coil 1.0ohm vaporizer;

Spare 4 ml bubble glass;

Spare Tight MTL Drip Tip;

USB Type-C cable;

Replacement O-rings;

Warranty card;

User’s Manual.

BTB box mod

Many vapers, looking at the BTB box mod, will say that it is clearly old-school and the device of this format can now only be found at flea markets. But if you look closely at this device, it becomes clear that the name Back to Basic was not chosen by chance because the device does resemble box mods, which to date are not the most popular. Although, to be clear, many modern trends are implemented in the BTB mod.

BTB mod looks quite original small rectangular mod tapering to the top, and not the smallest – 91 * 36 * 25 mm. Thanks to this size, you can install atomizers with diameter up to 24 mm on the box mod. The body is made of zinc alloy and plastic. The fact that the manufacturer offers seven original colors of two series camouflage and vintage, so there is a lot to choose from, can not fail to please.

The maximum power of the BTB mod box mod 100 watts is provided by a standard 18650 battery, which is installed under the side cover, held by magnets. If necessary, you can charge the battery using the USB Type-C connector located on the side of the device.

The BTB mod has a Quest chipset (not DNA, but not bad either), which Lost Vape has used more than once in its devices. The chipset is reliable and performant, allowing you to use the device in three modes varivolt, varivolt and thermocontrol. The display, which the device is equipped with, is color (with the ability to change the color scheme) and quite informative on it you can find all the necessary information for the vaper.

Ultra Boost X TANK Atomizer

Lost Vape BTB 100W Starter Kit uses Ultra Boost X TANK tank, which at first glance may seem like a standard un-serviced, but has a number of features and positive points that many vapers will appreciate. At once the vaper is offered two 510-head vape-types standard for DL-pulling and a little elongated with a small inner diameter for MTL-pulling.

Ultra Boost X TANK is designed to work with interchangeable vaporizers from Ultra Boost series, of which there are five, four for free draw and one for a tight cigarette. If you want you can buy an additional serviced base and set the spirals you like by yourself.

The important feature of Ultra Boost X TANK is that it can be used for both free and tight draws. To do that, you just turn the adjustment ring at the base of the tank, opening either one wide hole or two small holes.

The standard tank volume is 2 ml, but if you want it can be increased by installing a 4 ml bubble-glass. To fill the tank is simple enough, the top cap is slid in a straight line and you fill the liquid in a big enough hole. It is worth mentioning that when using an MTL-evaporator or RBA with a high resistance coil you can steam liquids not only on the organic, but also salt nicotine.

Conclusions and impressions

Frankly speaking, Lost Vape BTB 100W Starter Kit makes a double impression, because on the one hand it is an interesting device with an interesting tank, but on the other hand it is truly Back to Basic, a return to what was popular three years ago. In any case, if a vaper is looking for a reliable and simple starter kit, then Back to Basic is a great fit for him.

Advantages and disadvantages

Disadvantages

A small backlash of the battery compartment lid;

Not the largest tank volume even with the bubbleglass installed.

Advantages

The original design;

Large selection of colors;

Ergonomic body;

Fast charging;

Reliable board;

Easy control;

Two drip tips;

Two types of air blow;

Large selection of vaporizers and RBA;

Convenient refilling;

Good flavor and scent.