It is unlikely that any vapers will argue about the fact that for several years now the most popular and best-selling vape devices are the tube mods a la iJust. DNA or Drag fans can certainly argue, but let them remember where they started. The popularity of such devices is explained very simply by the fact that a vaper buys a completely ready-to-use starter kit for which it is not necessary to additionally buy batteries, charger, coils, and absorbent cotton. It is enough just to install the vaporizer, pour the liquid and smoke. Such a device was presented by Vandy Vape and, of course, in the usual collaboration with Alex VapersMD Berserker S Kit. The letter S in the name means Simple, a very simple device made of polysulfone (plastic) and designed for those vapers who do not want to waste time on maintenance and still prefer a tight cigarette puff. It is immediately worth answering the question of vapers as to why they decided to use these materials and the format of the device Vandy Vape Company decided to release an inexpensive and most affordable device.

General Data

Vandy Vape Berserker S Kit starter kit, consisting of a battery pack with built-in battery and the simplest possible control, as well as atomizer on interchangeable vaporizers, designed for a stiff cigarette draw. The form factor, in which the starter kit is made, is quite traditional and as simple as possible, but at the same time due to the minimal size it will appeal to many vapers. The device is equipped with a fairly simple board that provides a standard set of protections and two basic modes of operation. The whale atomizer is made as simple as possible, but it uses two types of vaporizers and has the ability to choose one of the two modes of operation. You can buy Vandy Vape Berserker S Kit in four colors black, red, white and blue.

Kit

Vandy Vape Company has always pleased vapers with a complete set of their devices, but taking into account the specifics of this device, it should be taken into account that it is simply physically impossible to put in a branded box more:

Berserker S battery pack;

Berserker S atomizer;

M Coil vaporizer on 0,7 ohm grid;

Evaporator with horizontal coil, 1.5 Ohm resistance;

Spare earings;

USB charging cable;

User manual;

Warranty card;

Certificate of authenticity.

Berserker S Battery Pack

If you analyze the range of Vandy Vape, it is the device of such class as Berserker S Kit that was missing in it. They have devices of very different class, and the most simple and inexpensive device that will suit beginners and vapers who want to get something compact, as easy to use as possible with a cigarette puff. It is worth paying tribute to Alex VapersMD, who once again pleased vapers with his joint development with Vandy Vape.

Of course you can not expect anything unique from the pipe, but at the same time the battery pack is made qualitatively and there are no claims or remarks to it. A significant plus of this device can be considered a small weight and compact size. The device is made of polysulfone (a type of plastic), so it does not weigh much. The diameter of the device is 22 mm, so you can screw any other atomizers of the same diameter on the battery block, as it is equipped with a standard 510 connector.

The Berserker S runs on a built-in 18350 battery with 1100 mAh capacity, which is enough for one or two days of autonomous work, especially since the device is originally designed for cigarette burners. The battery is charged using the traditional micro-USB connector. There is a LED ring around the button that indicates the level of battery charge.

It is worth to say that Berserker S can work in two modes – Bypass mode (the voltage supplied to the vaporizer depends only on the battery charge level) and constant voltage mode (constant 3,7 Volt voltage is supplied to the vaporizer). The modes are activated by holding the fire button for three seconds.

Berserker S atomizer

Berserker S atomizer is made from the same material as the battery pack. The important point is that there is no removable drip-tip in this atomizer, and it is a part of top cover. The drip-tip has original shape that shows it belongs to Vandy Vape family of devices.

There are two types of vaporizers used in Berserker S – 1,5 Ohm vaporizer with horizontal coil and new M Coil vaporizer on 0,7 Ohm grid. Depending on the vaper’s preference and the type of liquid he uses.

Berserker S is a cigarette inhaler tank where the airflow is adjusted by a swivel ring at the base. It opens 0.8/1.0/1.4/1.6/2.0mm diameter holes and if you want to puff a little, you can leave all the holes open.

You can fill Berserker S without any questions, you just have to unscrew the top cap and pour 2 ml of liquid through the valve. The presence of the valve allows you to make the device not only compliant with TPD, but also to protect children from the liquid, if they unscrew the top cap.

Conclusions and impressions

Vandy Vape Berserker S Kit is a great starter kit for beginners and experienced vapers who prefer cigarette puffs but don’t want to carry around bulky mods. Naturally, there are certain claims to the device, but it does not pretend to be a premium segment.

Advantages and disadvantages

Disadvantages

The ring adjusting has no stopper;

The USB connector is not very convenient;

The drip-tip is not removable.

Advantages

Compact size;

Low weight;

High capacity battery;

Two modes of operation;

Two types of vaporizers;

Easy to use and maintain;

Decent taste.